Carton Pizza Box Printing Machine Corrugated Box Machinery
Die cutting unit
1. Die cut unit roller adopt high quality steel, plated with rigid
chrome. high precision dynamic and static balance increase running
stable.
2. Mould roller and rubber roller can auto separate by cylinder
eccentric device when the machine don’t die cut, this can lighten
machine load and increase rubber roller and die knife life.
3. Matching with feeding system, it with auto up and down device,
the rubber roller will down when feeding paper. The rubber roller
will up when stop feeding paper. To make sure every paper die cut
correctly.
4. The mechanical transmission rubber roller move 58mm in left and
right side. It also with wear and tear regular could increase the
life of rubber roller.
5. Die cut phase adopt PLC touch screen, 360 degree adjust electric
number.
6. Machine with rubber amend device, the rubber roller can be used
after many times amend.
7. Free die mould slotting unit, no need to make the die mould when
making normal box, saving cost and improved efficiency. (optional )
Slotting part
(1) upper cutter shaft, lower cutter shaft, surface grinding hard
chrome plating, balance correction, smooth operation..
(2 )manual adjustment of line pressing wheel clearance, adjustment
data displayed on the dial.
(3) width of slotting cutter 7.0mm.Alloy steel material, after heat
treatment grinding tooth slotting knife.
(4) slotting tool seat clearance worm gear box adjustment, dial
display, adjustment range 0-12mm.
(5) slotted phase adjustment mechanism, planetary gear structure.
(6) slotted phase adopts phase controller electric digital 360
degree adjustment (operation and stop can be adjusted).
(7) manual synchronous adjustment of box height.
(8) the upper and lower rollers of the pressing line are made of
high quality thick-walled seamless steel tube, with the surface of
which is finely ground and plated with hard chromium.The roller has
a diameter of 200.
Parameter:
| Type | unit | GYK 1224 |
| Plate roller dia. | mm | 405 |
| Plate roller length | mm | 2420 |
| Inner width of machine | mm | 2850 |
| max speed | Ps/min | 160 |
| economic speed | Ps/min | 130 |
| max printing size | Mm | 1200×2400 |
| max feeding paper size | Mm | 1270×2600 |
| skip feed paper size | Mm | 1500×2600 |
| min feeding paper size | Mm | 320×720 |
| board thickness | Mm | 2-10mm |
| machine wall thickness | Mm | 60mm |
| topping precision | Mm | ≤±:0.35 |
Parts photo:
